Non conductive anti-twist pilot rope made of Polyester in 10,12,14,
and 16mm diameters. Made from High tenacity polyester yarn.
Supplied with a Durathane treatment which increases water
resistance and supplied with identification colour markers.
The ropes can be supplied in long lengths, with or without Vectran
fibre link straps for connecting more ropes together.
Supplied on steel reels of 1000m per reel.
LEVER HOIST FROM 3/4 TON TO 20 TON
The lever hoists are made of steel and equipped with mechanical
brake; they are designed to facilitate and accelerate chain positioning
AUTOMATIC AND BOLTED
clamps can be used whenever a conductor or cable or a rope made of
aluminium, aluminium/steel copper or steel, even if insulated, has to be
stretched. The body is made of high strength hot forged steel in
order to minimise weight in comparison with the working load. The
galvanisation treatment on the surface protects from oxidation.
The most important characteristic is the possibility to use the same
clamp for working on conductors or ropes of different diameters only by
changing the jaws; this feature makes it possible to reduce
The sagging block has been designed to fit tower cross arms to accept wire rope for sagging conductor..
Max. Wire rope Dia. 16mm
The Running out block is capable of accommodating the larger conductors. It is an
aluminium suspension block with an automatic safety date and steel side frames.
Insulator clevis mounting bracket.
Pulley Block consists of two or three sheaves. On the three
sheaves pulley block the middle sheave is used for the conductor
Swivels are essential for effective operation of underground cables. The swivels are fitted with bearings to prevent build up of twists in the cable bond. Swivels are precision manufactured in high grade steel with a plated finish. The safety working loads are based on a factor of safety 3:1
Fix joint for ropes. Designed for joining lengths of pulling
rope together to provide a continuous length of pilot rope. Fit for the
passage over the puller capstans. Easy to open.
Cable pulling grips are manufactured in high grade galvanized steel wire, in a double or single weave construction. A simple device for use with cables without a central strength member. The grip is slipped over the outside of the cable and when tension is applied the grip contracts applying the pulling force of the cable.
||ANTI TWIST COUNTER WEIGHT
Applied in stringing of OPGW to stop the conductor
from twisting and damaging.
|CONDUCTOR DRUM STAND
Each stand can be raised or lowered independently, using a built
hydraulic unit. The stands are capable of carrying drums up to 5 tons in weight, and will accommodate the largest existing drums. The stand is manufactured in two halves to allow easy access with full drums.
||ROPE PLAY OUT STAND
The rope play out stand has been designed to accept 700mm diameter rope drums containing 500m of 8mm “Superline” Rope.
||RUNNING EARTH AND EARTH SPIKE
For use when stringing steel tower lines. Suitable for conductors up to 32mm diameter. Should be earthed to existing steel work, tension stringing plant or earth spike.
A electronic dynamometer with digital for pulling and lifting
applications. Using strain gauge sensor LLZ are designed for use between
shackles or brackets. These units operate in all positions for forces
measurement and vertically for load checking and measurement.
Capacity: 1 ton
Other Capacities: 2t, 3.2t, 6.4t, 10t, 20t
CABLE STRIPPER WITH 4 DIES
SIZE: 240MM (L) X 100MM (W)
WEIGHT: 3.8KGS. with case (10kgs with all bushings)
Bushings for all sizes of conductor. (please specify conductor sizes
Light weight construction cuts aluminium strands of ACSAR Conductor
up to 43 mm diameter. Adjustable cutter wheel makes cutting safe
and predictable. Accommodate all sizes of conductor. Bushing
holder for all sizes of conductor bushing. Heavy duty plastic carry
case accommodates the Tool, Bushing Holder and up to 10 different sizes